Large TapeFormer Mounting Bench suitable for Models C, D, E, F, G, H and H Plus. If you have a model range that is across the two benches we can manufacture a special bench for your requirements

Small TapeFormer Mounting Bench is suitable for Models A, B, C and D.

The top of the mounting bench slides backwards to allow loading of the TapeFormer and forwards to allow the TapeFormer exit to be close to the extruder head.

Folds one edge of the tape back on itself. This is commonly done to allow a connection between the conducting sides of the tape.

For large tape widths, recommended 400mm+ . Exit options are 3/4 ring exit or spring exit. Possible profiles are A or X.

Pre TapeFormer tape guide / tensioner. Top PTFE insert to keep the tape in shape throughout the TapeFormer. Longer TapeFormer length for more gentle tape forming. Samples of cable and tape are required to manufacture this TapeFormer.

TapeFormer designed to be mounted in a holder. Uses the closing exit to make a tight wrap of the tape around the individual bunches prior to twisting.

Tape widths 5mm (0.196inch) up to 12mm (0.472 inch). Cable diameters 0.7mm up to 3mm+

The Double Wrap TapeFormer profile E applies two tapes in one process. If required, a drain wire can be introduced between the tapes. Profile E is possible with tape widths from 5mm up to 280mm.

Do you have an application that will require a special design of TapeFormer?

Do you have a TapeFormer that differs from our standard design and would like to keep this design?