Standard Range Tapeformer

Please click on the Profile, Cable Guide, Exit and Friction Reduction images to view more information

Please use the enquiry form to select your requirements and ask any questions that you may have.

Flat entrance TapeFormer

Flat entrance tapeformer

The standard flat entrance TapeFormer takes the tape from flat all the way to the formed shape.

Curved entrance TapeFormer

Curved entrance tapeformer

When it is not possible or desirable to make the TapeFormer long enough to start from the tape being flat we can use a TapeFormer with a curved entrance.

This means the initial forming of the tape is done in the air between the payoffs and the entrance of the TapeFormer. This initial forming can be aided by a pre former if necessary.

It is important that there is enough space given so the tape is allowed to form in its natural length as forcing it to form in a shorter length will cause problems.

Example of the setup for a curved entrance TapeFormer

Setup for a curved entrance tapeformer

MODEL H plus

Curved Entrance
Tape widths ranging from 251mm (9.84 inch) to 480mm (18.898 inch)

    Tape width

    Tape Thickness

    Is there a joint in the tape (splice).? If yes, what is the thickness :

    Cable Diameter under the tape :

    Profile

    Profiles

    Cable Guide Options B:

    Tapeformer cable guide B

    Exit Options B:

    Tapeformer Exit options model H

    Friction Reduction B:

    Tapeformers ceramic insert

    Scroll to Top