Profile S TapeFormer
Folds one edge of the tape back on itself.
This is commonly done to allow a connection between the conducting sides of the tape.
TapeFormers Tolerance
A TapeFormer exit is a fixed dimension and it is designed to be used with the cable diameter, tape width and tape thickness it has been manufactured for.
A jam will occur if a TapeFormer is used with a larger cable diameter, tape width and tape thickness than it was manufactured for, so this is not possible.
In some cases, it is possible to use a TapeFormer with a smaller cable diameter, tape width and tape thickness when used with a tape closing device e.g. a die. We cannot give guidance on how much smaller the cable and tape can be, tests need to be made to decide what is acceptable.
The pictures below give an idea of what happens when a TapeFormer is being used with the correct size cable and tape, and a smaller cable and tape. We cannot guarantee the performance of a TapeFormer that is being used with a smaller cable and tape that it was manufactured for.
STANDARD RANGE
- Model A 5mm to 20mm Tape Widths
- Model XL 5mm+ Tape Widths
- Model B 21mm to 37mm Tape Widths
- Model C 38mm to 50mm Tape Widths
- Model D 51mm to 75mm Tape Widths
- Model E 76mm to 99mm Tape Widths
- Model F 100mm to 130mm Tape Widths
- Model G 131mm to 210mm Tape Widths
- Model H 181mm to 250mm Tape Widths
- Model H plus 251mm to 480mm Tape Widths
- Model XL 5mm+ Tape Widths
- Model B 21mm to 37mm Tape Widths
- Model C 38mm to 50mm Tape Widths
- Model D 51mm to 75mm Tape Widths
- Model E 76mm to 99mm Tape Widths
- Model F 100mm to 130mm Tape Widths
- Model G 131mm to 210mm Tape Widths
- Model H 181mm to 250mm Tape Widths
- Model H plus 251mm to 480mm Tape Widths
